The Versys has a new owner inbound Monday so I wanted to prep the bike for his arrival which included adjusting, cleaning, and lubing the chain.
 |
| Chain slack was slightly above max tolerance. |
 |
| Removed the factory side Givi for better access. |
 |
| A little heat to remove cotter pin |
 |
| Adjusted to 1in of slack per Kawasaki |
 |
| The old screwdriver in the chain while tightening the axel nut |
 |
| After adjustment it was cleaned with WD |
 |
| Motul chain paste applied to clean chain and wiped off excess |